Click the (+) signs to read answers to our Frequently Asked Questions (FAQ). Email us at contact@atcmask.com for all your questions.
• ATC MASK™ ATCM-012 Washable Anti-Pollution N99 Face Mask: This is washable, has 2 exhalation valves, and comes with 3 changeable N99 activated carbon filters. This mask filters above 99% of particles with a mass median diameter of 0.3 micrometers. That includes PM0.3, PM2.5, and PM10.
• ATC MASK™ DL70V and ATC MASK™ DL90V Disposables KN95 Face Masks: These are disposables and have 1 exhalation valve each. These types filters above 95% of particles with a mass median diameter of 0.3 micrometers. That includes PM0.3, PM2.5, and PM10.
Both categories are certified and help to reduce the wearer’s exposure to particles found in air pollution, PM2.5, dusts, allergens, smoke, viruses, and bacteria, and can filter down to particles with a mass median diameter of 0.3 micrometers.
Each provides superior protection against particles found in air pollution.
All ATC MASK™ models are Particulate Respirators. Wearers often confuse particulate respirators with surgical masks. They may look the same sometimes, but there are many differences between them.
PARTICULATE RESPIRATORS SUCH AS ATC MASK™:
• According to the US National Institute for Occupational Safety and Health (NIOSH), particulate respirators protect the wearer’s lungs from airborne hazards such as particles found in air pollution.
•They can filter harmful particles in the air by reducing the wearer’s exposure to particles with a mass median aerodynamic diameter of about 0.3 micrometer which is within the most penetrating particle size (MPPS) of most filters.
•The main filter components are tested and certified (i.e., N99, N95, KN95, etc.). If N99 approved, the filter components in the particulate respirator have been tested and certified to filter above 99% of all particles. The same for KN95 - tested and certified to filter above 95% of particles.
•They are airtight and are meant to be worn without air leaks around the edges.
SURGICAL MASKS:
• According to US National Institute for Occupational Safety and Health (NIOSH), surgical masks are not designed for use as particulate respirators and do not provide much respiratory protection like tested and certified respirators such as N99 or N95 respirators.
• They usually fit loosely with gaps around the edges. They are not designed to protect the wearer’s lungs from airborne hazards.
• Surgical masks provide barrier protection against large droplets. They provide protection by preventing large particles such as mucous or spits, expelled by the wearer from entering the environment. They are worn for specific procedures and disposed of afterward.
Email us at contact@atcmask.com if you are not sure about your size.
Both ATC MASK™ Model DL70V and DL90V are disposables, and are designed to last for up to 50 cumulative hours depending on the pollution levels in your surrounding. For about 2 hours of everyday use, both models should last for about 25 days each until they need to be replaced. Replace mask when breathing resistance is noticeable.
The stylish skin of ATC MASK™ ATCM-012 is washable. The changeable N99 filters are designed to last for up to 50 cumulative hours depending on the pollution levels in your surrounding. If you use ATC MASK™ ATCM-012 for 1 hour every day in a moderately polluted environment, each filter should last you about 50 days in total. Replace filter when increase in breathing resistance is noticeable.
Follow the fitting instructions below.
DL 90V
FITTING INSTRUCTIONS
1. Place mask over face with the exhalation valve in the left face position and pull the ear loops.
2. Pinch or adjust the nose clip for tight seal over nose bridge.
3. Check air leak by holding mask to face. Adjust mask position for snug fit.
WARNING
1. This ATC MASK™ respirator is designed to reduce wearer’s exposure to airborne and non-oil based particles. It does not eliminate the risk of illness, disease or infection.
2. Do not use this mask in situations where the oxygen content of the environment is below 19.5% and the temperature exceeds 50℃.
3. Inspect the mask before use. Do not use mask if any part is damaged.
4. This mask is not designed for use in chemicals, vapors, gases, and oil-based particulates environment.
5. Wearer must ensure tight seal over nose and mouth for effective filtration.
6. This mask does not guarantee protection from illness or any harmful substance.
7. ATC Mask™ Model DL90V is designed to last for up to 50 cumulative hours depending on the pollution levels in your surrounding. For about 2 hours of everyday use in a moderately polluted environment, this mask should last for about 25 days until it needs to be replaced. Replace mask when breathing resistance is noticeable.
8. To discard, place mask in a secure bag and deposit into a waste disposal unit.
Product Name: ATC Mask™ Anti-Pollution Face Mask
Model: DL90V 1 pcs
Main Filter Component: 30gsm KN95 non-woven melt blown filter
Period of validity: Use by 2021 / 09
Execution standard: GB2626-2006 KN95
Production license: XK02-001-100183
Certificate of safety mark: LA-2006-0032
Relative humidity for storage: <85% RH
Temperature range for storage: -5℃ to 50℃
DL 70V
FITTING INSTRUCTIONS
1. Place mask over face with the exhalation valve in the left face position and pull the ear straps.
2. Adjust the straps by pulling the ends toward the face for desired fit. Connect both straps to the hook for a snug fit (optional).
3. Check air leak by holding mask to face. Adjust the mask position and straps for snug fit.
WARNING
1. This ATC MASK™ respirator is designed to reduce wearer’s exposure to airborne and non-oil based particles. It does not eliminate the risk of illness, disease or infection.
2. Do not use this mask in situations where the oxygen content of the environment is below 19.5%, and the temperature exceeds 50℃.
3. Inspect the mask before use. Do not use mask if any part is damaged.
4. This mask is not designed for use in chemicals, vapor, gas and oil-based particulates environment.
5. Wearer must ensure tight seal over nose and mouth for effective filtration.
6. This mask does not guarantee protection from illness or any harmful substance.
7. ATC Mask™ Model DL70V is designed to last for up to 50 cumulative hours depending on the pollution levels in your surrounding. For about 2 hours of everyday use in a moderately polluted environment, this mask should last for about 25 days until it needs to be replaced. Replace mask when breathing resistance is noticeable.
8. To discard, place mask in a secure bag and deposit into a waste disposal unit.
Product Name: ATC Mask™ Anti-Pollution Face Mask
Model: DL70V 3 pcs
Main Filter Component: 50gsm KN95 non-woven melt blown filter
Period of validity: Use by 2021 / 09
Execution standard: GB2626-2006 KN95
Production license: XK02-001-100183
Certificate of safety mark: LA-2006-0032
Relative humidity for storage: <85% RH
Temperature range for storage: -5℃ to 50℃
ATC MASK™ ATCM-012
FITTING INSTRUCTIONS
1. Open the mask, insert N99 filter and attach head strap to the earloops.
2. Adjust the strap as desired for a comfortable fit.
3. Pinch or adjust the nose clip for tight seal over your nose bridge.
4. Check for air leaks by holding mask to face.
HOW TO REPLACE FILTER
1. Remove the valves by pulling away from the valve cap.
2. Match the filter to the mask’s skin.
3. Insert the back valve case in the matched filter and mask holes.
4. Lightly press the valve cap until it snaps into place.
WARNING
1. This ATC MASK™ respirator is designed to reduce wearer’s exposure to airborne and non-oil based particles. It does not eliminate the risk of illness, disease or infection.
2. Do not use this mask in situations where the oxygen content of the environment is below 19.5%, and the temperature exceeds 50℃.
3. Inspect the mask before use. Do not use mask if any part is damaged.
4. This mask is not designed for use in chemicals, vapor, gas and oil-based particulates environment.
5. Wearer must ensure tight seal over nose and mouth for effective filtration.
6. This mask does not guarantee protection from illness or any harmful substance.
7. ATC Mask™ Model ATCM-012 is designed to last for up to 50 cumulative hours depending on the pollution levels in your surrounding. For about 2 hours of everyday use in a moderately polluted environment, this mask should last for about 25 days until it needs to be replaced. Replace mask when breathing resistance is noticeable.
8. To discard, place mask or filter in a secure bag and deposit into a waste disposal unit.
Filter expiration date: June, 2021.
Note: Your ATC MASK™ Washable comes with an already fitted filter.
The main filter components inside DL70V and DL90V are KN95 approved (GB2626-2006)
For ATCM-012, we order the replaceable filters from a manufacturer with an N99 approved certification by the Nelson Labs.
We work very hard to get your orders on the way as soon as we receive them.
Orders placed before 11:00 AM GMT are shipped the same day.
Orders placed after 11:00 AM GMT are shipped the following working day.
All our orders are delivered by Ghana Post. We use DHL and EMS for international orders.
Orders in Accra are mostly delivered the same day for 12.00 Cedis.
Domestic orders outside of Accra are shipped the same day or the next day for 18.00 Cedis depending on the time we receive your order. Estimated delivery is within 2-3 working days.
International orders are shipped the same day or the following day depending on the time we receive your order, with estimated delivery within 3-5 working days. Shipping charges depend on quantity. Estimated charges are displayed on product pages.
Free Shipping
We offer free shipping for all orders above GH¢95 in Ghana and $90 for the rest of the world. Free shipping may take up to 3 weeks for delivery in Ghana, and up to 8 weeks for the rest of the world.
